What could be more worthy than to celebrate the 70th anniversary of the Great Victory by building a combat UAZ from a special anniversary version of the UAZ Hunter?
Obviously descending directly from the GAZ-67B, this real off-road iron fighter is better suited to building a combat vehicle than the pop UAZ Patriot.
WIN ON VICTORY DAY
It was decided to celebrate the anniversary Victory Day by going to a serious off-road. Therefore, the Maestro was acquired. I must say that in the factory version, the "victorious" version is not much different from the usual Hunter. Black rims with black hubcaps, slightly more “evil” tires, body color in a protective color and steering rod protection from stamped steel sheet. But most importantly, a soldier’s duffel bag with a bowler hat and a trenching tool was attached to the car. And, of course, airbrushing on the sides - based on the movie "Only Old Men Go to Battle".
PROTEIN AS SHOE
Of course, in the standard form, the car will pass where the owners of other cars will already go on foot. But for a complete and absolute victory over off-road, it was decided to modify the car a little, at least to drive where the owners of vehicles on 35 wheels would not go. Therefore, they immediately decided to equip the car with radical tires from the FBEL-160M tractor 36.5 inches high. It was under these tires that they began to build a car. To do this, the specialists of the Vezdekhod 777 tuning workshop first of all replaced the factory transmission parts with reinforced axle shafts and CV joints manufactured by the Hammer and Sickle plant. Naturally, the main pairs were installed with a gear ratio increased to 1: 5.125. A special kit was added to the transfer case, increasing the reduction to 1:3.3, otherwise the motor would not be able to turn the huge “gears” of the wheels in the mud. The clutch also needed to be strengthened - the TAYA-Trophy kit was installed. Now it remains to lift the car so that the huge wheels fit in the arches. The all-terrain vehicle was raised by 130 mm, but this, as it turned out, was not enough. They also lifted the body by 60 mm. And then I had to trim the arches a little - and only then did the huge "gears" of the tractor tires stop clinging to them at full suspension travel.
Elevator. Body lifted with 60mm spacers
Together. Used in the front suspension
and elongated springs, and spacers for them
BATTLE PART
In order to lift the suspension, RIF springs and springs, spacers for springs and spring earrings were used. Shock absorbers have chosen the Dutch brand Hola. And in order for the car to drive straight and not scour, the angle of longitudinal inclination of the kingpin (castor) was increased to 9 degrees. The wheelbase has been slightly increased by moving the front axle forward by 30 mm and the rear axle by 20 mm. As a result, the car has good directional stability and confident handling at high speeds. And even jump!
What is a combat SUV without locks? Of course, the car was equipped with wheel locks manufactured by Izhtekhno Blokka. These are hard, unmanaged locks designed for serious off-road use.
Soft move. Additional springs in the rear suspension
compensate for insufficient stiffness of leaf springs
The engine was left unchanged. But to make it easier for him to "breathe", they removed the resonator from the exhaust system. As a bonus, the car has a thoroughbred sound. The intake of air through the snorkel changed the intake system. We replaced the control unit with a tuning, sealed one that works without lambda probes. As a result, traction on the bottoms, already quite good, has grown even more. But that's not all. The engine cooling system has been redone. Instead of a mechanical cooling fan with a visco coupling, two electric ones were installed. Now the belt does not tear even in the mud and there are no problems with cooling, especially since the aluminum radiator was replaced with a three-row copper one. And the breathers of the units were brought up, but the oil in them is changed anyway after each trip.
From stumps and stones. The guard protects the tie rods and
transfer case from forced contact with solid obstacles
ARMOR
The power body kit for the combat "Maestro" is not that necessary, but without it it's somehow not right. Therefore, RIF power bumpers settled in front and behind. Front - with kengurin. A 4x4 winch with a capacity of 5500 kg (12000 lbs) was immediately installed in it. Later, the same winch was installed in the rear bumper (it was not there at the time of the shooting). In order to supply the powerful winches with enough electricity, the weak standard generator was replaced with a 150 A Rif one, and a gel battery with a capacity of 110 A / h was installed instead of a standard battery.
Military look. Light masking strips on the headlights
unequivocally speak about the army origin of the car
Don't worry, let's break through! With winch power
12,000 lbs theoretically you can lift the "UAZ" vertically up
Protection of steering rods and transfer case "RIF" are also necessary accessories for a combat vehicle.
For high-quality lighting, tank headlights were additionally installed on the kengurin and, when this material was already being made up, an LED beam along with the RIF expeditionary trunk.
VICTORIES IN THE YEAR OF VICTORY
The car participated in the Stariza-24 daily trophy marathon, and, according to the owner, never had to use winches even where they were used by cutlet-shaped prototypes. During our shooting, there were no car-worthy obstacles nearby. Then we decided to try to break the car by jumping from a springboard. Alas, the car showed real military endurance and reliability, galloped briskly, bouncing with all wheels hanging, but did not break down and was confidently controlled.
We thank the owner, Mark, for providing the car
Every year, cars of domestic origin, which at the end of the last millennium were an integral part of every settlement, are becoming less and less. An example can be called - almost a real legend, with high capacity and cross-country ability. Many people know this car from its use in gas emergency service or ambulance.
Recently, quite often this car has been used to create their own limousine.
What qualities does the car in question have?
Finding a Loaf in good technical condition is currently quite difficult. However, if the vehicle body is not badly damaged by corrosion, then it can be used for self-tuning. UAZ can be characterized as follows:
- High permeability. The model under consideration was often used to create a vehicle with high cross-country ability. This is due to the fact that it has four-wheel drive, and the curb weight is low. In addition, do not forget about a sufficiently high ground clearance, which also determines the increased cross-country ability.
- Large capacity. The vehicle has an almost flat floor, high body height. At the same time, the body has a square shape, which is important when tuning.
- Also, do not forget that the vehicle initially has poor equipment. This point determines a significant simplification of the work of dismantling the finish.
In general, we can say that it is one of the most popular cars among those that are most often used in tuning. That is why we will consider all the features of the work on tuning the cabin. The onset of winter cold becomes the reason why it becomes cold and uncomfortable in Bukhanka. This is because the degree of isolation of the vehicle is very insignificant. Within a short time, the body freezes, and the installed stove does not cope with the tasks.
The above information determines that additional insulation needs to be carried out. When carrying out tuning, in which thermal insulation is performed, you can significantly increase the comfort of staying in a car. UAZ cannot be attributed to expensive vehicles. That is why it is not advisable to invest more money in it. That is why we will consider how you can insulate the cabin using improvised means.
Types of material used for interior insulation
Many companies that provide professional vehicle modification services often use special materials that can protect the interior from cold and noise. However, the cost of such insulating materials is relatively high, which determines a significant increase in the cost of improving the cabin.
When choosing a thermal insulation material, you should pay attention to the following points:
1. The thicker the material used, the less space in the vehicle interior. At the same time, with an increase in the thickness of the material, the work of laying the material becomes much more complicated. An example is the laying of insulation on bends.
2. Also, do not forget that the insulation must withstand a sufficiently high temperature, vibration and other influences.
Work to increase the thermal insulation qualities has been carried out over the past few years. During this time, materials were found that are most suitable for solving the problem. The traditional choice for thermal insulation can be called:
- Sheet plywood. This material does not have a high cost, it is represented by sawdust of wood, which is glued together. Wood is one of the most common heat-insulating materials of natural origin.
- Foam rubber is an artificial heat-insulating material that is very popular. It is lightweight, inexpensive, and can be processed. However, it should be borne in mind that the material is quite combustible.
- Special noise and vibration isolation coatings. They have a fairly high efficiency, are used in the professional tuning of many cars.
- Traditional thermal insulation materials such as mineral veil, aluminum foil, bituminous sheets and many other materials.
- In some cases, the floor is insulated with aluminum sheets of sufficiently large thickness. The metal is laid if there are problems with the integrity of the body due to severe corrosion.
Sidebar: Important: It is worth considering the moment that the final result will be influenced not only by the properties of the selected material, but also by the quality of the work being done. When performing work, it is necessary to adjust the dimensions of the material to the dimensions of the body as accurately as possible, to exclude the possibility of cracks and large gaps. Particular attention is usually paid to the insulation of the door. It is she who, due to the design features, often becomes the cause of the cold in the cabin.
Application of polystyrene
Quite often, polystyrene is used as an insulating material. It has been used to solve the problem under consideration over the past few years.
We refer to its features:
1. The low cost is due to the peculiarities of production.
2. High thermal insulation characteristics. If we consider this material in comparison with others that can also be used in this case, then it is significantly superior to others in terms of efficiency.
3. Does not respond to high humidity, which can also be called quite an important point.
4. Easy to operate.
1. Flexibility.
2. Surface integrity.
If the sheets do not have high flexibility, then they cannot be used to isolate surfaces that are in different planes. As with other materials, thermal insulation is carried out with polystyrene, then all ventilation openings should be left open. In this way, the possibility of mold and fungus formation on the surface of the skin can be excluded, since ventilation is necessary to prevent the greenhouse effect.
However, a significant disadvantage should also be taken into account. The material is highly flammable, which significantly reduces the safety of movement on the vehicle. You should also take into account the fact that with strong heating of the body, there is a possibility of releasing harmful to the human body. Therefore, in some cases it is advisable to pay attention to other insulating materials.
Foil insulation
Recently, foil insulation has been quite popular.
It is combined with other insulating materials to increase the efficiency of the work carried out. The following points can be attributed to the features of the use of the considered insulation:
- If you carry out high-quality styling, you can achieve the effect of a thermos. Foil fabric perfectly copes with insulating properties, does not allow heat to escape into the environment.
- In some cases, you can get by with only one foil sheet. An example is a material called penofol. It is made of foamed polyethylene in combination with a foil layer. Penofol is available for sale in various versions, the thickness of the material does not exceed 20 millimeters.
The peculiarities of the use of this material include the fact that the foil surface must necessarily be directed to the inside.
This recommendation is due to the fact that the foil surface becomes a kind of reflective screen that retains heat and prevents it from escaping into the environment. Light weight and thickness determine the high efficiency of the material. That is why it is quite often used when insulating a car.
Application of sheet plywood
Previously, sheet plywood was used quite often to achieve the task in question. Note that this material is quite often used in car tuning, as it has a low cost and a high degree of machinability. We refer to its features:
1. Light weight and single sheet thickness.
2. The material can be found at the most affordable prices.
3. Changing the shape and size is carried out using the most common tools.
4. Natural origin determines a high degree of environmental cleanliness.
However, there are also significant drawbacks, due to which sheet plywood has become rarely used for insulating the interior of a car. An example is the moment that the material is based on wood, which means it is susceptible to the effects of high humidity. Also, do not forget that the flexibility of the material is low - this moment determines that the material can only be used to isolate straight planes.
Quite often, when using plywood to insulate a car, you also have to purchase special material for waterproofing, because otherwise high humidity, condensation and many other points will cause fungus and decay.
Polyurethane spraying
A modern way to isolate the body can be called polyurethane spraying on the inner surface. This method has recently become very popular, as it allows you to achieve a truly effective result.
We note the following features of this method of insulating the vehicle body:
- To begin with, attention should be paid to the fact that the material can be applied to various surfaces, the plane of which is located relative to each other at an angle of 90 degrees or more. At the same time, the dimensions of the car also do not affect the efficiency.
- Also, do not forget that this method allows you to fill in all the cracks in the car body, which, over a long service life of the Loaf, may appear in various parts of the car.
- The technology of applying the material is quite simple, but requires special equipment. Therefore, it is often impossible to do the work yourself. However, we note that the cost of the procedure is relatively low. Under the special equipment is meant a spray gun that is capable of applying polyurethane foam, which is in a liquid state, to the surface.
- Primary drying of the applied material takes place within 20 seconds. After that, the insulating material becomes less susceptible to attack. It takes at least a couple of hours to dry completely. These moments determine that the car will be ready for further work or operation during the day.
- Unlike some other materials, polyurethane foam is absolutely environmentally friendly, that is, it does not lead to the release of harmful substances into the environment. When the body is heated in a warm couple of years, the insulating material in question does not change its main operational properties.
- The features of the considered method of applying the insulating material determine that the applied substance, after complete drying, creates a seamless coating. At the same time, the dimensions of the body and its geometry do not affect the final result. The absence of joints and seams determines the high insulating qualities of the formed material layer.
- The material itself has high adhesion and flexibility. These moments determine that it is quite easy to attach another skin on it, and when it is clamped, the sound of crackling and rattling will disappear, since all panels will be rigidly fixed.
- Polyurethane foam serves for several years, does not require additional maintenance or repair for a long time period.
- A high indicator of lightness determines that insulation work does not cause significant weighting of the car structure. It is worth remembering that an increase in the curb weight indicator causes an increase in fuel consumption and a significant deterioration in cross-country ability and controllability. Therefore, the use of heavy insulating materials should be avoided.
- The use of sheet insulating material causes the formation of gaps, a small space between it and the body. It is this reason that leads to the formation of condensate, as a result of which the process of corrosion occurs on the surface of the body.
In general, we can say that this method of body insulation is one of the most attractive. It should be noted that it is not only heat-insulating, but also sound-suppressing material. Thus, when using it, it is possible to increase the hydro-thermal-sound insulation not only of UAZ, but also of other cars.
Mineral wool
Mineral wool has recently been used in the insulation of various structures and structures, including a car.
Such a high popularity can be attributed to the following key features of the material:
1. It has a relatively low cost.
2. When using mineral wool, you can increase the heat and sound insulation of the car.
3. Light weight determines that the curb weight of the vehicle does not increase significantly.
4. The material can be processed, rock wool sheets can be cut into different, most suitable parts.
5. Ecological cleanliness determines that even during long-term operation, the material does not emit harmful substances into the environment.
6. Easy to use, high application efficiency.
Quite often, when looking for an insulating material, mineral wool is chosen, which is produced in the form of rolls with a small thickness. Flexibility with a small thickness determines the possibility of using wool to insulate curved surfaces, which are quite numerous in a car.
How the work on its installation will proceed depends on the characteristics of the selected insulating material. However, in all cases, the preparatory stage will be approximately the same.
It consists of doing the following:
- First you need to dismantle the entire skin. Note that when doing this work, you should be careful, as some trim elements will be needed in the future even when changing the interior.
- Pay special attention to the wiring. When dismantling the casing, you need to be careful, since minor damage to the wires can lead to significant problems: it will not be difficult to replace the wire, but it will be quite difficult to find the place of damage or the faulty wire itself.
- In order to achieve high efficiency from the insulating material, it is necessary to cover all surfaces. Particular attention is paid to the wall that separates the engine from the rest of the vehicle interior.
- Dismantling must be carried out to the metal itself.
- After completion of dismantling work, the body should be inspected and its condition determined, if necessary, repair work should be carried out.
- The surface before laying any insulating material is first cleaned of dirt, then degreased.
- Separately, it is necessary to highlight ventilation passages that cannot be sealed with insulating material.
In general, there are no problems with dismantling, since the panels are fastened in the usual way: with screws, bolts, fasteners and other common fastening materials. You can use the vehicle manual to disassemble the front panel.
Maksim. Among all the methods of car body insulation, I recommend stopping at polyurethane spraying. This method simply cannot be compared with others in terms of the simplicity of implementation and the result achieved. That is why it is recommended not only by me, but also by other experts in the field in question.
Yuri. Conducted, decided to work out the quality of the insulation. I used foil sheets and mineral wool - I was pleased with the results. Friends recommended polyurethane, a new method of application by spraying, but I wanted to do the work myself and save money. Therefore, I settled on the indicated materials.
Video tuning salon UAZ Loaf
ordering tuning your UAZ in our Autotechcenter, you turn to professionals and fans of their business! We love this car brand as much as you do, and we also know how to improve this car for you.
On our website you can read about options for tuning UAZ cars and see what we can do.
With us you can do tuning any UAZ model. Call us right now if you already know what you want to do with your car or check out popular options tuning UAZ.
UAZ Hunter | UAZ Patriot | |||
---|---|---|---|---|
Job | spare parts | Job | spare parts | |
body lift | 10050 | 5000 | 10000 | 4000 |
Suspension lifting | 7050 | from 10000 | 7000 | from 17000 |
Steering damper installation | 2550 | from 5500 | 2500 | from 5550 |
Installation of the front power bumper | 4500 | from 20000 | 4200 | from 20000 |
Installing the rear power bumper | 4500 | from 20000 | 4000 | from 20000 |
Installation and manufacture of thresholds and protection of the gas tank with reinforcement | X | X | from 20000 | 6500 |
Body soundproofing | 25000 | 15000 | 30000 | 17000 |
Installing a reinforced front axle cover | 1000 | 5500 | 1000 | 5500 |
Winch installation | 2100 | 4000 | 2000 | 4000 |
Winch connection | 2550 | from 28000 | 2500 | from 28000 |
Conclusion of breathers | 3500 | 3000 | 2500 | 3000 |
Snorkel Installation | 6000 | 7000 | 5100 | 7000 |
Tie rod protection installation | 2100 | from 4500 | 2100 | from 4500 |
Changing the caster angle | 5100 | for spring vehicles + 2100r | 5100 | for spring vehicles + 2100r |
Front axle reinforcement | 13500 | 1000 | 13500 | 1000 |
Rear axle reinforcement | 13500 | 1000 | 13500 | 1000 |
Self block installation | RZM/RPM 11500 | 18000 | RZM/RPM 7000/9000 | 18000 |
Tuning cars UAZ includes the following services:
UAZ car lift (UAZ bodylift, UAZ suspension lift)
One of the basic elements of tuning a car, especially an SUV, is a lift, i.e. lift the car relative to the road surface.
There are two types of lifts: body lifts (body lifts) and suspension lifts. More on these options below.
The easiest and safest way to tune is body lift or body lift UAZ, which is performed using spacers between the body and the frame of the car. The main way to increase the cross-country ability of the car is liftovka or suspension lift UAZ. There are many ways to loosen the suspension, depending on the design of the car. But the backlash of the suspension affects the stability of the car, increasing its center of gravity, thereby reducing roll and making the car prone to rollover. To eliminate this problem, the track widening method using wheel spacers is used. And most importantly, when lifting the suspension, the angles of inclination of the cardan shafts change.
Installation of winches
The winch is an important element when tuning UAZ cars. It is used to help the car get out of the off-road trap.
Winches differ in the principle of operation and are of the following types:
Mechanical winches. These winches are usually installed at the factory and are rarely used for tuning.
Electric winches. The most common type of winches, because. can be installed on any type of UAZ car. These winches are distinguished by their ease of use, simple design, and the ability to work with the engine turned off. The main disadvantage is the use of a large amount of car energy, so additional batteries must be installed.
Hydraulic winches. These winches are distinguished by their high price, reliability of the hydraulic motor, resistance to overloads, and the ability to work under water. But there are also disadvantages: slow cable reeling speed, it is not possible to use the winch when the engine is off.
Installation of front and rear disc brakes on vehicle axles.
Disc brakes improve the vehicle's off-road and asphalt performance, making braking safer.
Installing the air intake
In order for the UAZ engine not to choke on water when loading the car under water, it is necessary to raise a wave. Since the ingress of water into the engine cylinders is very critical for the car. To do this, provide for the removal of the engine snorkel to the roof of the UAZ.
Tuning salon UAZ
It includes the manufacture and installation of leather interiors, the installation of thermal insulation and sound insulation of the body interior.
Installation of kenguryatnik and bumpers.
Kenguryatniks are installed on UAZ in order to protect the car when driving off-road and from collisions with animals. UAZ bumper tuning includes the installation of front and rear bumpers to protect the car and the installation of additional equipment (for mounting a spare wheel, mounting a winch, towing eyes, headlights, brackets)
Lighting installation (xenon, bi-xenon)
To increase the safety of driving a car in difficult weather conditions, xenon and bi-xenon headlights are installed.
Bridge lock setting
To increase the cross-country ability of UAZ, devices with forced and self-locking blocking are installed on civil, military bridges, as well as bridges of the "spicer" type
Installation of the trunk and ladder
Installing a trunk on a UAZ will allow you to take a lot of useful things with you on a trip (tent, boat, spare wheel). Additional lighting can also be installed on the trunk.
Other tuning options
Also, popular UAZ tuning options include:
- body tuning
- Sealing of ventilation, fuel, electronic and other vehicle systems
- Installation of navigation systems (GPS, GLONASS), communication systems
- Lubrication of all components and assemblies to increase service life
- Car anti-corrosion treatment
- Power steering installation
- Installation of KPP-5
- Installation of power windows
- Steering damper installation
- Modernization of the engine cooling system
- Threshold trimming
- and other
Tuning UAZ, performed in our car service, will increase the confidence and reliability of driving. UAZ modernization will allow you to use your car to participate in trophy raids, expeditions, extreme sports, as well as for fishing and hunting trips.
Accessories and additional equipment is a broad category that includes many products for UAZ vehicles. All products are conveniently divided into subcategories so that you spend a minimum of time searching for products of interest.
Range
- aerodynamic body kit - bumpers, headlight housings, sills, emblems, etc.;
- roof racks and supports, chandeliers, roof boxes, etc.;
- catalogs and operating manuals for current models of the UAZ brand;
- ladders, cargo securing devices and travel accessories;
- LED optics, on-board computers and much more.
Go to the section of interest and choose accessories and additional equipment for your UAZ model. Or browse by VIN number to see only compatible options.
BAZASHOP: fast delivery and favorable price
It is convenient to work with us for the following reasons:
- You will find a large selection of spare parts and equipment for UAZ and VAZ - everything can be ordered in one place.
- A parcel with goods can be delivered anywhere in Russia - by mail, EMS or courier service.
- We are flexible in terms of payment - you can pay in cash or by card, or transfer to a bank account.
Add the items you are interested in to the basket and place an order, after which we will immediately contact you and discuss all the nuances. For detailed information about the presented products, call 8-800-700-95-54.
- Found 2178 products in the category Accessories and additional equipment for UAZ;
- Prices from 7 to 143309 rubles;
- 1334 products in stock and 844 available on order, delivery throughout Russia.
Tuning UAZ cars (Patriot, Hunter and others) - we will make a real jeep from your “fighting” all-terrain vehicle
Many UAZ owners strive to give their car an exclusive look, expand its functionality, increase the level of reliability, and adapt it to operation in difficult conditions. UAZ SUVs are cars with a special character. In extreme situations, they can be exploited to the limit, and they will not let you down! Do you want to use your UAZ jeep to the fullest?
This can be achieved with the help of car tuning - its versatile refinement in order to improve external data and performance, increase efficiencyoperation of various systems, components, assemblies.
Tuning center "UazMaster" will make your serial UAZ modern, comfortable and updated. We implement for you an engineering project of any complexity. The work takes into account: the wishes of the customer, driving style, the budget allocated for revision and the purpose of the tuning.
What tasks does UAZ tuning solve?
Tuning a car, depending on the preferences of the customer, can solve one or more different tasks. Here are just a few of them:
- Creation of original external design. External tuning UAZ will transform the car and disguise minor damage.
- Increasing the level of comfort inside the cabin. Riding in any traffic conditions will become much more comfortable, which will positively affect the driver's attention and reduce his fatigue.
- Increase in engine power. Masters of the technical center "UazMaster" will increase the torque of the internal combustion engine, help optimize throttle response and reduce fuel consumption.
- Refining the suspension and transmission for driving in difficult conditions. The use of suspension parts designed for increased loads will allow you to confidently operate the car on difficult road sections, and an improved transmission in conjunction with the appropriate rubber will not allow the car to get stuck even in deep mud.
- Installation of additional equipment (winch, lighting). Additional equipment expands the functionality of the car, comes to the rescue in regular and non-standard situations.
Some car owners try to do such improvements on their own. However, if you do not have the proper experience and appropriate qualifications to carry out such work, then you can
not only not improve, but also harm your vehicle, which, in turn, will adversely affect its reliability and safety of operation.
Do you want to conquer off-road? Upgrade your car in UAZMaster!
Do you want to really upgrade your car and conquer off-road in the most impassable places? Come to the technical center "UazMaster"! Our experts will help to put into practice all your ideas for improving the vehicle and its refinement to suit your needs.
We will prepare your UAZ for the most severe tests. To do this, we will perform the entire range of work required, from replacing standard wheels and installing mud tires to installing additional headlights and disc brakes. With us, even the most modest UAZ will turn into an exclusive all-terrain vehicle for travel and outdoor activities!
Do you like hunting and fishing, adrenaline and trips to “untouched” places?
Then you need:
- Larger rims and tires.
- Power kit (Bumpers, protection, thresholds).
- Winch.
- Differential lock.
- Reducing gears in RK.
- Additional lighting.
Our masters will make other improvements that will make you feel confident and safe even on extreme roads.
UAZ tuning services at the UAZMaster technical center
We provide the following tuning services:
External body elements:
- Body kit, sills, power bumper (kenguryatnik)
- Fuel tank protection.
- Snorkel.
- External trunks, ladders.
- Body lift.
Engine:
- Chip tuning, ECU firmware ZMZ-409, E2, E3.
- Engine crankcase protection.
- Torque increase.
Transmission. Installation:
- Self-locking and forcibly locking differentials.
- Protection of the checkpoint, RK.
- Bridges SPICER, TIMKEN, military (gear)
- Replacement of the pivot assembly bridge SPICER, TIMKEN.
- Suspension:
- suspension lift.
- Replacing shock absorbers.
Steering. Installation:
- Steering damper.
- Tie rod protection.
Brake system. Installation
- Disc brakes.
- Disc brakes of the new sample (cable)
Electrical equipment. Installation:
- Additional lighting fixtures.
- Alarms with remote engine start.
- Radio and rear view cameras.
- Parktronic front, rear.
- Navigation devices and communication systems.
- Salon:
- Noise isolation.
- Warming.
- Design and remodeling.
Installation of additional equipment and accessories:
- Starting heater.
- Autonomous interior heater.
- Winches.
- compressor and receiver.
- Hatch installation.
- Installation of racks for weapons.
We are responsible and vouch for the quality of the services we provide. Therefore, we give a guarantee for all work performed by the technical center on tuning the Ulyanovsk SUV UAZ.