Heating a private building is one of the main tasks that arises before people who want to live in a warm and comfortable room.
Until now, the use of a stove is considered a very popular way, a variety of which depends on the size of the building, the preferences of the owners and other factors.
Heating in a private house
You can heat your home with:
- Drovyanoy stoves - peat, coal, firewood are used for heating;
- Gas- runs on liquefied gas;
- Cast iron constructions - fuel is peat, firewood, coal, diesel fuel;
- Finnish- only firewood is used;
- Electrical.
Benefits of a gas oven
The gas oven has recently become not in vain very popular way of heating the house, since it can also be connected to backbone network, and to conventional balloon with gas. Design the most economical among all types of ovens.
The unit differs positive properties:
- poses no danger for people's lives;
- can be placed in houses made from any building materials;
- uses for work natural liquefied gas;
- It has small size;
- does not burn out in room oxygen;
- different big economy;
- simple in operation;
- durability and the ability to work without interruption.
Device elements. Types of burners
The equipment in question must include such components:
- brick or metal case;
- chimney;
- foundation.
In the body are three elements:
- Heating shield.
- Fuel tank.
- Gas burner, which is a replaceable element. She happens one-, two-stage and may have floating adjustment. If necessary, the burner can be replaced with a more or less powerful one.
These ovens operate permanent or temporary, which is achieved through the presence of automation. The principle of operation of the units is quite simple: a burner is placed in the firebox, in which the process of burning gas takes place, the latter is removed through the chimney.
Photo 1. Scheme of the internal structure of a gas furnace. All major parts of the structure are signed.
In the event that it is planned to build a furnace on one's own, inside it lays out red brick. If it is allowed to use additional fuels in the appliance, the brick must be refractory.
Above the firebox is chimney, and below - blew through which air enters the furnace. It is without this part of the entire structure that the fuel will not burn.
The device of gas ovens is designed in such a way that gases flowed through certain channels having maximum five smoke turns.
Attention! All channels must be located strictly upright, otherwise it will be prohibited to install the device in question in the house.
Deciding to install a gas stove in your house, the following features must be taken into account:
- When choosing a device, first of all, pay attention to its power, because only the temperature indicator in your home depends on this. How much power the burner will have will be affected by the future heated area, the number of windows and doors in the house, as well as their condition, wall thickness and more.
- When purchasing a gas structure, you should first take care of enough good ventilation in the house. If there is none and it cannot be improved, then the installation of such a furnace is strictly prohibited.
- Consider complete set favorite system. In some cases, it is equipped with adapters, which allows you to connect to several fuel sources.
- The design in question is suitable only if the house has no more than two floors otherwise the entire heating system will be inefficient.
- For ease of use and additional control of the device, a a special sensor that detects the level of carbon dioxide. If there is any change in the air, the stove will turn off automatically.
- In the event that you buy finished metal oven, you need to ask about the documents for the device, which indicate whether it is really safe for use in a residential area.
- Categorically forbidden install this type of stove in wooden houses, channels in which are located horizontally.
When purchasing a gas stove, you need to consider what will be square heated room. It is easy to calculate it. For 10 square meters living space should be 1 kW power burners (for stock it is better to add 15-20%). Thus, in a house whose size will be 100 square meters, oven needs to be installed power of 12 kW.
You will also be interested in:
Types of stoves
If speak about heat capacity, then in this case the furnaces are divided into two categories:
- Heat-intensive have brick building, which accumulates heat in itself, and then gradually releases it into the environment. Once switched off, the oven, depending on its size, can still continue heat the room for 4-12 hours.
- Not a heat-intensive design is made metal. She generates heat only when the process of combustion of gas occurs. After the fuel supply is cut off, the device cools down very quickly. The advantage of this design is that it has small size and weight and can be installed even in small spaces.
Photo 2. Elitech TP 4GI compact ceramic gas furnace. A fuel tank is built into the back.
Furnace your way appearance there are:
- round;
- oval;
- rectangular.
The appearance of the device affects only its combination with a certain interior.
Reference. Internal oven design not related to her external view.
Placement of the gas heating device
The gas stove can only be installed in those houses in which air ducts pre-installed correctly. They must be strictly vertical.
Attention! Never install a structure close to the wall. The allowed value is at least 50 centimeters.
As grounds it is forbidden to use wood or linoleum. It should be smooth, firm and non-flammable. In addition, depending on the size of the furnace, the base must exceed it at least 10-15 cm on each side.
The placement of the device in the house is affected by its power:
- Installation in progress in the kitchen if this indicator no more than 60 kW.
- In case of excess power ( more than 60 kW) installation is allowed in a separate room or outbuilding.
Not allowed placement of such stoves in houses, the height of the walls of which does not reach two meters.
Connection rules
Connect the structures under consideration only experts can because they will do everything quickly and reliably. If you decide to do the installation yourself, you should adhere to certain advice and recommendations.
- Select well accessible and ventilated place in the house, given the location of the chimney.
- Measure out at least 50 cm from the walls and make durable, non-combustible base, which will be on each side more bottom area kilns approx. by 10-15 cm.
- If you plan to build a brick building, you need protect the walls with heat-resistant material.
- Using stainless steel pipes, connect the chimney with a stove.
Reference! Pipes must be pushed one into the other at least by 5 cm.
- Connect the installed structure to the gas pipe special hose by tightly tightening the joints.
- Before connecting to the chimney, install inside it is a stainless steel pipe.
- chimney placed strictly vertically.
Important! Permissible tilt angle chimney is equal to 30 degrees.
- If the outer part of the chimney is not inside the brick well, then it must be wrap with insulation, and on top cover with stainless steel sheet.
- Number of turns chimney should be within 3.
- Using the brackets attach the pipe to the wall without sagging.
- Connect with a tee stove pipe.
The heating system of the house is undoubtedly the most important moment for the owners of cottages or houses outside the city. There are heating circuits, liquid fuel boilers, gas stoves for home heating and many other systems. Since the type of heating depends on how you will live in the building, you need to make the right choice. This is a very responsible and important task.
Sometimes the selection process becomes quite complicated, because a mistake in this matter can lead to many serious problems. The most popular heating system is gas. But it will be possible to install it only when there is a gas main near the house. If not, then gas ovens can be a good option.
Modern models of gas ovens
Furnace device
The equipment includes a body, a chimney and a foundation. The body is built of bricks. It has several elements, these are a heating shield, a firebox and a gas burner. In the absence of a central heating system, a gas stove can be installed in a house consisting of no more than two floors. These furnaces can operate in two modes: permanent or temporary. The gas is burned in a gas burner located in the firebox. The upper part of the firebox implies the presence of a grate, which is used by refractory bricks.
Gas stove-heater
Chimney scheme
During the operation of a gas stove for heating a house, the grate heats up, and warm air moves along the walls of the firebox. This contributes to uniform heating of the entire house.
For more efficient use of the firebox and heating the lower masonry, gas burners should be installed as low as possible.
A chimney extends from the upper part of the firebox, and the lower part of the firebox borders on the blower. It provides air to the furnace, without it the fuel will not burn.
Firebox material
The blower door is equipped with a small hole through which the stove is switched to gas. In the event that you will not use a gas stove for heating the house all the time, the material for making the firebox should be refractory bricks. For the constant operation of the furnace, use red brick to build a firebox with your own hands. A shield must be installed in the chimney.
Under the influence of traction force, warm air from the firebox will enter the chimney, warming it up. If you have a wooden house, flue gas can be led through channels connected in series to warm it. They should consist of a maximum of five wells.
Red brick for the firebox
It is strictly forbidden to use gas stoves in houses where the channels are located horizontally. Like wood stoves, a gas stove for heating a house should be located a short distance from the wall.
Pros and cons of using gas ovens
Each heating system has both its pros and cons. Gas heating stoves have some advantages:
- This type of oven does not emit harmful substances. They can be used regardless of the time of year and day. You can sleep without fear and not worry about possible interruptions in the heating system.
- The stove can reach a high temperature and maintain it in fairly severe frosts. Your home will always be at a comfortable temperature. With the help of a gas stove, you can easily heat your home or heat your cottage.
- Profitability. Gas stoves for home heating are the most economical heating in relation to fuel costs. And unlike wood-burning stoves, gas does not require storage space. It does not need to be searched or brought. Gas is one of the most inexpensive types of fuel.
- Simple use. You can not worry about the complexity of the heating process. Gas stoves for home heating are very easy to use.
- Reliability. Within 10-12 years, this heating system will work without interruption. You don't have to worry about it breaking down.
Even gas stoves for heating a house have their drawbacks, which cannot be ignored. However, if heating systems of a different type can be found many shortcomings and shortcomings, then a gas stove has only one.
This drawback is the high cost of the equipment. But despite this, the furnace pays off easily due to the economical use of cheap fuel.
Connection rules
If your house is located far away and is not connected to a gas pipeline, you will have to spend a lot of money on installing heating. And not every family is ready to pay a significant amount for this. Gas is used at home by many. And if your house is already connected to a gas main, arranging a gas stove will be much cheaper for you financially.
Boiler room
Once you have installed a gas stove for home heating, it is necessary to carry out a mandatory check after installation of the equipment.
Any shortcomings, malfunctions and damage that may have occurred during the design of the furnace may adversely affect the quality of the heating system. And we must not forget about the danger of gas, both for health and for human life.
You have already familiarized yourself with the main points and principles of operation, the functionality of modern stoves for heating a house. As you have already noticed, these devices stand out relative to other systems with their characteristics. It is the gas stove that needs to be installed in the case of a gas pipeline passing near your house.
Do not be intimidated by the initial high cost of equipment. Remember that an expensive gas stove will pay for itself completely and very quickly. A gas stove will help provide a pleasant and comfortable environment for your home.
Do you need to install a gas oven? It's up to you and your family to decide. For our part, we have provided you with all the information you need to make the right decision.
Didn't get an answer to your question? Ask our expert: Ask
sdelatotoplenie.ru
Gas stove for giving: the principle of operation and classification. Choice of gas burner
Choosing a good system for heating the premises of a country house is not an easy task. With the wrong approach, the cost of paying utility bills will be a very significant amount. The best option is gas stoves for heating summer cottages.
Gas is an efficient fuel for heating a summer house
Expediency of choosing gas as a fuel
The use of gas-fired heating devices has many advantages:
- Absolutely safe during operation. The process of gas combustion in a heater for a country house occurs without an open flame. In a special block, manufactured using the most modern technologies, the oxidation process takes place, as a result of which a large amount of energy is released that heats the air, water or other coolant in the heating system.
- A gas boiler is much smaller than its counterparts that use other types of fuel. Therefore, it is perfect for installation even in country houses from block containers, without taking up much space in tight spaces.
Gas oven - compact and efficient
- The gas stove for giving is completely autonomous and mobile. For its operation, only liquefied gas is needed, which can also come from a connected cylinder.
- The system consumes a minimum amount of fuel, therefore its use can significantly save on heating.
- Gas stoves for summer cottages do not burn oxygen in the room during operation. They do not affect human health, but the instructions for their use require the mandatory presence of an exhaust hood.
- Natural gas heaters do not depend on the presence of voltage in the mains, which is very important in suburban areas, where there are often interruptions in its supply.
Advice! If you have wire breaks or power outages in your country house, renting a diesel generator for your country house will help out. This device will allow autonomous functioning of all electrical appliances in the house.
It is enough just to fill the tank with diesel fuel and start the device.
Cottage gas supply systems
If you have decided to use a gas heating stove in the country, you should obtain the appropriate permission from the state authorities before purchasing and installing it. This requirement is due to the fact that gas equipment is a source of increased danger, therefore its operation is carried out in compliance with certain requirements.
There are several options for gas supply to the cottage:
- Centralized - in this case, gas is supplied to consumers from the central network. Residents of city apartments are familiar with this method firsthand.
- Autonomous - gasification of the site is carried out according to an individual project using a separate gas tank. The advantage of the system is that in addition to the heating boiler, you can install other devices: a stove, a water heater, and so on. The downside is the high cost of gasification work.
Gas tank - individual gas tank
- Balloon - replaceable cylinders are used, which are connected to the system as they are emptied.
The principle of operation of the gas heater
The operation of a gas stove is based on the same principle as that of wood-burning boilers. However, water or other liquid is not used as a heat carrier. In this case, heating occurs due to the convection movement of cold and hot air layers, and it is not wood that burns in the furnace, but natural gas mixed in certain proportions with oxygen.
If necessary, the purchased stove can be integrated into the existing water heating system of the cottage, as well as connect the heated air distribution system to neighboring rooms.
Combined boiler for heating a summer house
There are also combined systems:
- electrical;
- on liquid fuel;
- solid fuel.
The latter varieties are the most effective. The system, equipped with an additional gas burner, does not cool down in the pauses between the furnace, as a result of which the temperature in the rooms is kept at a comfortable level during the entire period of use (and does not cool down at night when the boiler is not fired with coal or briquettes).
Device classification
Gas boilers are widely used for heating private houses. They have proven themselves well in the dachas. Most often, factory systems are purchased, designed for certain conditions of use. However, under the order, you can fold the oven from bricks.
Heat production method
According to this criterion, gas furnaces for heating are divided into several types:
Photo of a gas boiler with a heat exchanger
This is another indicator that characterizes various models of gas stoves for heating cottages. He talks about the ability of the device to accumulate the thermal energy created by it.
There are two main options:
- Constant burning. Such aggregates do not have thick walls and cool quickly. But they are able to heat the room in a very short time after switching on, since the air warms up quickly during contact with the combustion chamber. To ensure a comfortable indoor climate, the oven must operate continuously. Great for summer residents who rarely visit a suburban area in the cold season. Within a few minutes after arrival, you will enjoy the fertile warmth.
- Periodic inclusion. The design has a heat-intensive element, which heats up during the combustion of gas, and then, after the burner is turned off, gradually releases heat to the surrounding air.
Brick gas stove for heating
A brick usually acts as a heat accumulator, which is used according to the following schemes:
- they lay out heat-conducting channels;
- the gas combustion chamber is lined;
- heating panels are manufactured.
This option is widely used for heating private houses and baths.
Choice of gas burner
Any gas stove for heating a summer house structurally consists of the following elements:
- combustion chambers (heat exchanger);
- corps;
- combustion products removal systems;
- air channels;
- control electronics.
The main element of any system is a gas burner. Let's look at this issue in more detail.
Appearance of the gas burner
Device description
The following parameters of the entire unit depend on which burner is used in the furnace:
- efficiency;
- power;
- profitability;
- safety.
In this unit, natural gas is mixed with oxygen, after which they are oxidized (combusted) in various modes. The whole process is controlled and regulated by the most modern automation.
Varieties of burners
According to the method of control, the devices are divided into:
- single-stage (gas supply turns on and off);
- two-stage (the furnace can switch to an intermediate - economical - mode);
- with floating adjustment (intensity of gas combustion is regulated in a wide range).
According to the type of air supply for heating the burners are:
- atmospheric - air is sucked in independently, efficiency is not higher than 90% (advantages - no need to connect the furnace to the mains)
- fan - air is supplied to the chamber using a fan, the efficiency is above 95% (the oven must be connected to a power outlet).
Fan-assisted gas burner
According to the method of ignition, the burners are divided into:
- electronic - an electrical network is required;
- piezo ignition - no electricity is used to ignite the gas.
Criteria for choosing a device for heating a home outside the city
When purchasing gas heating stoves for summer cottages, it is necessary to take into account many different parameters. After all, not only the warmth and comfort in the house depends on this, but also the costs for the subsequent operation of the entire system.
Efficiency
The cost of natural gas used for heating is rising from year to year. Therefore, the purchased heating equipment must have a high coefficient of efficiency. That is, with a minimum amount of fuel to produce the maximum amount of heat.
This is achieved primarily by good insulation of the heat exchanger. It is thanks to this that the efficiency of the stove will be at a high level.
Scheme of a gas furnace for heating
Price
When choosing a gas boiler with your own hands, it should be borne in mind that a high-quality unit cannot be cheap. The cost of most domestic models is less than that of their imported counterparts.
But in most cases, this is achieved through the use of materials with reduced thermal insulation characteristics. This, in turn, requires the use of more fuel to heat a small dacha.
Advice! When buying, choose a model from a well-known manufacturer that has been proving its effectiveness for many years.
Despite the fact that the price of such products is somewhat higher, this investment will fully pay off in the course of subsequent operation.
Scope of use
Gas heaters can be used for heating both indoors and outdoors. For example, by placing a special device on a veranda or terrace, you can create a cozy corner for spending time outdoors.
Portable gas heater
Conclusion
The use of gas stoves for heating country houses is an effective and inexpensive way to create a comfortable atmosphere in your home. But all the advantages are fully revealed only in the case of choosing a high-quality and reliable model.
You can learn more about heating methods from the video in this article.
9dach.ru
Gas stove for home: pros and cons
- Characteristic
- Advantages and disadvantages
A gas stove for a home is a convenient option for heating a house if a gas main runs nearby. Natural gas is a very practical type of fuel. Its use is simple, so gas heating is the most common type of heating.
For a private house, the organization of heating is one of the key issues. With difficulty, but you can do without running water or sewerage in a private house, but life in the house is impossible without heating in winter.
The choice of heating method depends on many factors:
- Technical features of the premises.
- Owner's financial capacity.
- Fuel availability.
- Host preference.
The most commonly used fuels are solid (wood, coal, peat briquettes) and natural gas. But sometimes they use electrical appliances and installations, liquid fuels.
Characteristic
Heating with gas can be carried out using different equipment for burning fuel:
- boiler;
- convector;
- infrared emitter;
- gas oven.
A distinctive feature of a gas stove for heating a house is that a gas burner is located in the firebox of the stove. Gas tends to burn quickly and release a lot of heat, which gives off to the elements of the furnace or heat exchanger. For gas furnaces, a metal case is more suitable; the efficiency of such a furnace is higher.
The weight of the metal furnace is small, the foundation for it is not needed. A brick oven can be equipped with a gas burner if it has a small firebox, a long smoke circulation system.
Advantages and disadvantages
Furnaces on different types of fuel have their own characteristics, advantages, disadvantages. When choosing a stove for a home, you need to evaluate them, compare them with your capabilities and features of the house.
The advantages of gas ovens are:
- Furnaces are non-toxic. When burning gas, there is no ash, soot, soot left. It is impossible to get carbon monoxide poisoning from such a furnace. For the environment, a gas stove is the best option. The process of fuel supply is automated, there is no need to monitor the furnace, so the furnace can work around the clock, even at night.
- The required temperature is easily reached. It is possible to heat both a large house and a small country house. Gas furnaces have high efficiency, the gas burns quickly and completely even with a small supply.
- Gas is a cheap fuel. There is no need to create conditions and places for its storage, to move fuel, which is very convenient for the owners.
- Gas ovens are easy to use.
- Furnaces are durable. Worked without problems for over 10 years.
Gas ovens have two main disadvantages:
- Dependence on the source of fuel - the gas pipeline. If there is none nearby, the use of a gas oven is not possible. Use of the furnace working from a gas cylinder is possible. But such a stove is not able to heat a large house, its efficiency is low.
- High cost of equipment. Not every family can afford to purchase equipment for organizing a gas heating system. But if the gas is already brought to the house, the price is significantly reduced. In addition, some organizations sell equipment in installments. You can also use the services of a bank and purchase equipment on credit. The high price will soon justify itself. Saving on fuel allows you to quickly recoup the cost of arranging the system.
Kinds
There are several signs of the classification of gas furnaces:
By appointment:
- Bath ovens. They have a heater and a tank for heating water.
According to the method of heat transfer:
- Heating the walls of the combustion chamber. Heat is transferred into the room from the walls of the furnace.
- With heat exchanger. The heat exchanger is usually a pipe that is heated from the furnace and then transfers the heat to the room. Most often, furnaces with a water circuit are used. The stove has a water tank connected to a pipe system that is located throughout the house. The heated water moves through the pipes, heats them, and heat spreads throughout the house.
By heat capacity:
- Furnaces of constant burning. They have a small heat capacity, quickly heat up themselves and heat the air. Cool down quickly.
- Intermittent combustion furnaces. They have a high heat capacity and, as a rule, impressive dimensions (to increase the surface area).
According to the body material:
- Brick.
- Metal.
By manufacturer:
- Homemade. The use of homemade gas stoves is prohibited. Gas ovens must be certified and approved. But masters often use home-made stoves, usually in non-residential premises.
- Ready. Factory production. With the necessary certificates and approvals.
After installation, any gas stove for the home must be checked by the relevant services and accepted for operation. Improper installation and operation of the oven is hazardous to health and human life.
stroy-king.ru
Which gas stoves to choose for home heating
Perhaps heating your own home is the most important task that faces the owners of houses or summer cottages. The most common problem is the process of selecting the appropriate heating equipment. Of course, this issue should not be the last one for any owner of a private housing area. In addition, if you do not have a connected wire to the main gas, then the gas system is not for you. In this article, we raise the question of whether it is worth giving preference to a gas system.
Gas oven for your home
Which heating system to choose for a private house or cottage
Of course, in order to choose the appropriate equipment, you can study all the reviews. After that, consult with sales assistants in the store or read the relevant articles. Do not forget that the cottage and the house must receive heating of the entire room, otherwise you will not be able to enjoy comfort in the winter cold. Gas stoves, according to experts, have a number of features that are not achievable for most other heating systems.
Advantages
You should not hide the fact that any system that produces heating for houses has both positive and negative sides. Let's try to understand them in as much detail as possible so that you have a complete picture, and negative reviews (if you suddenly see them) do not scare you.
Consider the advantages of devices called "gas stoves" that can be installed in your home:
Non toxic
It is immediately worth emphasizing the fact that these systems are completely non-toxic, and you can safely use them at any time of the year, at any time of the day or night, and also not be afraid to sleep with the system turned on.
High temperature performance
By purchasing gas stoves for your home, you get the most faithful friend who will not allow you to stay in the cold in severe frosts. The dacha will also receive reliable heating (you can verify this by reading consumer reviews).
Inexpensive fuel
In order to choose a gas stove, you don’t have to put a lot of mind and effort, but in the end you will get a very economical assistant. Natural gas is very cheap for consumers.
Easy to operate
If you are worried that the heating produced by the selected system will be too difficult for you, leave the prejudice behind. It is gas ovens that can guarantee the simplicity of the process of use.
Durability
Do not forget that your house or cottage will receive a durable assistant. At the moment, there is a very small percentage that such a system can become unusable during the first ten years of regular use.
Are there disadvantages?
After reading our article, most likely, you will ask yourself the question: “are gas stoves endowed with disadvantages?”. We will answer you honestly. Such heating, like the heat produced by other systems, of course, has certain disadvantages. The only difference is that one system has a significant number of flaws, while the other has only two or three.
The dacha or house should receive professional heating, which can only be achieved with a well-equipped system. As for the disadvantages, stoves with a gas heating system have two factors that the consumer may not like:
- First, it is expensive equipment. As we have already found out, gas stoves are endowed with low gas consumption, which is quite cheap. Natural gas can be used in everyday life by any average family. As for the installation process and directly connecting the system to the main gas pipeline, you will have to invest a lot of money. If a main gas pipeline has already been introduced into the territory of your site, then the price will drop by several tens of thousands, but if not, get ready for spending (but it's worth it).
- The gas system equipped in your home must necessarily pass a post-installation check, since any shortcomings or manufacturing defects that were not noticed during the installation process can give discomfort to all members of the house. Remember that natural gas is hazardous to health and life.
Summarize
Here we have considered the most important points related to heating systems. Now you know for sure that it is gas stoves that differ in their characteristics, and they should be equipped on the territory of your home. In addition, financial investments will pay off very quickly after a few years. Such a heating system will give you real warmth, and you will certainly appreciate it. But to install it at home or not, it's up to you.
Heating a private house is one of the main concerns for the owner. When choosing a heater, the owner puts forward the requirements of practicality, duration and ease of operation, and the price of maintenance is also an important factor. A simple gas oven meets all the parameters. We will understand the nuances of choosing a device, the characteristics and features of the operation of gas heating.
In this system, the coolant is gas, therefore, in addition to heating devices, the design includes gas pipelines for fuel supply, heat transfer, shut-off and control valves, and automatic equipment for safe fuel consumption.
Mains gas can be used for heating. The system is centralized, unified, fuel is supplied to the consumer through pipes. There is also the option of using liquefied gas supplied in cylinders of different volumes or poured into gas tanks.
Advantages and disadvantages
Experts note the following advantages of using a gas furnace:
- Operation at any time of the year, day. The gas heating stove in the house does not give interruptions, it is only important to take care of the presence of the coolant itself.
- Increased efficiency. Devices provide a comfortable temperature in the house in any climatic conditions, including severe winter frosts.
- Convenience. Unlike solid fuel boilers, gas-fired units do not require a lot of space, raw materials are relatively cheap, and you do not have to equip a separate room for its storage.
- Ease of operation. With a properly designed control system, all work comes down to pressing a button that starts the equipment in operation. Prevention and maintenance costs are kept to a minimum.
- Durability. The gas stove for the home is one of the longest-running appliances. The warranty period is 10 years, and subject to the installation and application technology, the device will last much longer.
The main disadvantage is the high price. But the minus is leveled by the low cost of fuel, the long service life of the system.
Varieties of gas ovens
Devices differ in type of fuel, heat capacity, shape and other indicators. The equipment consists of several elements: body, chimney, foundation. In the case there is a heating shield, a firebox, a gas burner. The burner is a replaceable element that can be one-, two-stage and have a floating adjustment. If desired, the owner can easily replace the burner with a more or less powerful one.
Fuel type
The main fuel supply is considered more practical, in this case you don’t have to freeze if you forgot the cylinder or didn’t have time to fill it. For regions with interruptions in gas supply, experts recommend choosing combined devices that operate on all types of fuel: solid, liquid. The equipment is more expensive, but the positive properties quickly pay for the price of the units.
Important! Liquefied gas, coal, firewood, fuel oil, diesel fuel are used as fuel for combined furnaces. The characteristics of the products are selected depending on the requirements of the user.
Heat capacity of the furnace
The parameter differs in the ability of the structure to accumulate and release heat.
You should choose furnaces for their intended purpose, that is, for continuous or periodic operation:
- Furnaces with a regular heating cycle are made of metal with thin walls, and are not capable of accumulating energy. The advantage is fast and uniform heating of the room. Minus - consumption of a large amount of fuel. But it is the systems of a constant heating cycle that are more effective for periodically heating a room. For example, if the house is used only during the season, and in winter the owners come only for the weekend, then a constant heating gas stove would be more appropriate than all other units.
- Intermittent switching devices look like stationary furnaces lined with bricks or heat-shielding reflective screens. The design works on automation, switching on occurs when the set temperature level in the room decreases, and as soon as the air warms up to the desired parameter, the stove turns off.
Production material
The duration of operation of the device, the cost and heat capacity of furnaces depend on the material of manufacture.
There are several types of equipment:
- Pig-iron gas furnace for heating with a door of a furnace compartment. The door can be made of refractory glass, the firebox itself can be used to supply coal and firewood. The price of the device is high, the payback is fast, the operation is very long.
- Heat-resistant or stainless steel construction. The advantages of the furnace are the efficiency of heating the room, the longest possible service life, and the relatively low cost. The only downside is the low heat capacity.
Some craftsmen make gas stoves on their own, choosing sheets of iron of the desired thickness, then lining the stove with bricks. The equipment will last a little less than cast-iron models, and for the price and basic characteristics of the product, it is much better than some industrial designs. Minus - it is difficult for a beginner master without experience to cope with the task.
Types of ovens by purpose
The characteristic divides the units according to the type of work - in houses with permanent residence or irregular inclusions for heat supply. For mansions of year-round use, devices of a periodic type are suitable, for rare visits - furnaces of a constant heating cycle.
The main purpose of the unit is to supply heat to the premises. Depending on the requirements of the owner, the devices can be with constant temperature support (automatic on / off) or quickly heat the room, but then require the participation of the owner to restart.
How to choose a gas stove for your home
What to look for:
- Power. The temperature in the house depends on this parameter. The burner power, heated area, number of windows, doors, wall thickness, roof integrity are taken into account.
- Equipment. Manufacturers equip the systems with adapters, which allows you to connect the unit to several fuel sources. But this design is suitable for houses no more than 2 floors high, otherwise the efficiency of the system drops.
- Heat generation method. Furnaces with burners show greater performance than catalytic ones. The latter are recommended to be installed in houses with a small area, the power of the catalytic furnace is not more than 4.9 kW.
- Burner type. The simplest is a single-stage burner, independent of the power supply, with automatic switching on and off of the device. A two-stage burner - a device operating in 2 modes, makes it possible to save up to 40% of the nominal value. This means that while there are no people in the house, the stove will work in a reduced mode, saving fuel. A continuously variable burner is expensive, but it allows you to quickly change the heat supply mode.
- Air supply to the furnace. Atmospheric ventilation of the combustion chamber differs, in which air is supplied in natural mode, the efficiency is 90%. And there may be an inflatable system where air is forced in, with an efficiency of 95%.
- Type of fuel combustion chamber. A gas stove with an open combustion chamber takes air from the room, but the exhaust gases also exit into the room. Furnaces are mobile, convenient, but require good ventilation of the room. A closed chamber is a more practical option in which a chimney is equipped. Furnaces do not burn oxygen, so they are better suited for permanent residences.
If the gas stove in the house is equipped with an additional sensor that detects the level of carbon dioxide, the device will automatically turn off when the dangerous level is exceeded - this is very convenient when there are children in the family. It is strictly forbidden to purchase units that are not intended for installation in residential premises. Before buying, you need to request documents for the device, carefully read the instructions from the manufacturer.
Calculate gas consumption
To determine fuel consumption, you need to know two parameters: the power of the device and the heating area. The calculation is carried out as follows: for 10 m2 of living space there must be at least 1 kW of burner power. It is better if the gas stove will work with a margin of 15-20%.
Now you should calculate: the production of 1 kW of power requires 0.112 m3 of gas. That is, for heating a room of 50 m2, (5 kW x 0.112) 0.56 m3 of gas is required for 1 hour of operation of the unit. Having found the desired figure, it is easy to carry out calculations on the required amount of fuel per day, the heating season. From the given example: 13.44 m3 of gas is required per day, 403 m3 of gas is required for one month of continuous operation of the furnace.
On a note! Taking into account the power reserve for a house of 100 m2, a stove with a power of at least 12 kW should be installed.
Today it is difficult to find a user who would never cook on stoves powered by blue fuel, natural trunk or liquefied from cylinders. Many Russians use desktop gas stoves in dachas where there is no main gas pipeline, the product is connected to the cylinder, having an oven available, this design completely replaces the standard stove.
Many readers are interested in how such miniature devices differ from full-size models, what are their technical parameters, advantages and disadvantages. To learn all the nuances of proper use and find answers to frequently asked questions, we advise you to carefully read our article.
Tabletop mini-stoves equipped with an oven have the same set of technical parameters as their standard counterparts, so we will briefly highlight each.
Dimensions and weight
These very compact products have a width of 550 mm, a height and depth of 400 mm, so they can be installed anywhere in the kitchen, for example, on a wide windowsill or a stand-alone cabinet from the kitchen set. Product weight up to a maximum of 19 kg.
Housing and hob
The body of the original oven is made of brown enameled metal, this coating is resistant to minor mechanical damage. The cooking surface with gas burners is made of heat-resistant enamel, it is quite easy to care for it, just do not use detergents with abrasive content, so as not to scratch the surface.
Hobs and burners
Many consumers still confuse these names: for gas cooking, a modern design with automatic ignition on piezoelectric elements or an electric analogue is used - this is called a burner, and open burners are installed in the oven.
Oven
The miniature copy is designed for baking and is capable of performing the same actions as the standard version, only the internal volume of output is not more than 19 liters. The door is equipped with double-layer glass to protect users from possible burns, because the maximum temperature reaches 270 degrees.
Gas control system
Modern gas equipment is produced only with such systems designed to ensure the safe use of blue fuel. In the event of a sudden extinction of the flame, a special sensor transmits a signal, a special rod shuts off the gas supply to the burner or burner in the oven.
Child protection
The rotary switches are designed in such a way that small children will not be able to turn on the gas stove during the absence of adults.
Today, not many manufacturers are engaged in the production of miniature gas stoves with ovens, the Gefest company from the Republic of Belarus is the leader in this.
Features of stoves with gas burners
The range of gas mini-stoves with ovens is small, so choosing the best option for your needs is quite simple. Almost every model can operate on mains or bottled liquefied gas. The dimensions of such products are small, like their own weight, so they are easy to transport, for example, to the country house, so that during the entire season of work in the garden and in the garden you can provide yourself with hot food and even homemade cakes.
The oven is small, but it will really help you out in the fall: you can pasteurize canning jars in it, dry chopped fruits or mushrooms collected in the forest. Using a grate and a pan to collect fat, you will cook deli meats no worse than in a standard oven in a city apartment. The main advantage of such a product is its unique compactness and excellent mobility.
Pros and cons
The advantages of desktop models are almost identical to those of their large-sized counterparts:
- There is no inertia when heating the burner, so the dishes and their contents are instantly heated.
- After the gas supply is cut off, heating also stops, which means that there is no 100% risk of overcooking food.
- The heating power can be controlled visually, reducing or increasing the burning of the flame.
- The cost of gas in any region of Russia is much less than the price of electricity.
- Although the cost of miniature desktop analogues is higher, they are available to the general population.
There are some minor downsides:
- the oven has fewer options than in the standard version;
- the cylinder connection system needs to be checked more often than the trunk version.
Gas household appliances have been the most affordable and very popular solution for many years. Modern developments improve the technical parameters, use, as well as the safety of long-term operation.
How to choose
It is necessary to choose a desktop household gas stove in such a way that it meets your requirements, experts advise paying special attention to such characteristics:
- Dimensions and weight. We have already talked about the standard dimensions of desktop stoves earlier - they rarely exceed the parameters of 550x400x400 mm, and the weight is not more than 18-19 kg. Such a product does not take up much space, even in the smallest country kitchen.
- Each model has two burners, and their total power does not exceed 1.6 kW, they can be the same in size or different, depending on the whim of the designer.
- The body of the product is made of metal coated with white or brown enamel; heat-resistant enamel is used for the hob. Compact models harmoniously fit into the interior of any kitchen.
- Oven. The inner coating is enameled metal, it can be of a gas or electric type - this is already an amateur, some prefer an electric grill for frying meat delicacies, but for a summer residence, a gas analogue is still considered more comfortable.
- The presence of a grill and a spit increases the cost of a mini-stove for desktop placement, so this addition is only of interest to gourmets who want to taste their favorite delicacy in any environment and weather.
- All models have a high level of safety, which is achieved by using the latest technologies: gas control sensors are installed in the oven and on the hob, the automatic ignition system helps to do without matches and piezo lighters. Parental control should be present in any household equipment if you have small and rather inquisitive children in your family.
Rating
- Material:
- body - metal with heat-resistant coating
- hob - enameled steel
- Total power:
- two burners - 1.70 kW
- ovens - 1.0 kW
- Oven volume: 19 l
- Maximum temperature: 270 0 C
- Dimensions: 550x400x400 mm
- Weight: 18 kg
- Warranty: 2 years
- Additional information:
- Brown colour
- the number of glasses in the oven door - 2
- baking sheet, wire rack
- compactness and light weight
- the presence of a gas control system
- oven works great
- not found
The model is really of excellent quality, as evidenced by the positive reviews of many real users. The Gefest company from Belarus keeps the quality and reliability of manufactured household appliances at the level of the USSR - you can use the device for at least 20-30 years.
- Material: enameled metal
- Energy class: A
- Total power:
- burners - 1.6 kW
- ovens - 0.4 + 0.6 kW (upper and lower heating elements)
- grill - 0.8 kW
- Oven volume: 18 l
- Maximum temperature: 260 0 C
- Dimensions: 390x550x400 mm
- Weight: 18.3 kg
- Additional information:
- runs on natural and liquefied gas
- electric oven
- power consumption at standard load - 0.49 kW. hour
- easy to use desktop stove
- quality plus reliability
- in the oven it is good to cook porridge
- not found
Gefest PG 100 K19
Save on social media!
Today, many have their own summer cottage with a house and other buildings. Today, very often summer cottages have a centralized gas supply, so it would be an excellent option to use gas heating. After all, the device for heating can be placed anywhere, as it can even work from bottled gas.
I will tell you in detail about the features of using gas heating and types of equipment in this article.
Heating summer cottages with seasonal residence is not an easy task. The classic option for such houses is brick ovens, but they have a number of disadvantages. An excellent alternative to tradition has become a gas stove for summer cottages and country houses.
This method of heating is especially well suited in settlements where the main gas pipeline has already been laid, but the heater can be easily installed in any house, since it can also work from bottled gas.
By their design, gas furnaces differ little from conventional boilers. The main difference lies in the principle of operation - the heater is not connected to the piping system. The result is a very user-friendly heating method.
If necessary, the house can be heated very quickly, while there is no risk of freezing of the system with a liquid heat carrier, as when installing a boiler.
Structurally, stoves for summer cottages, operating on mains or bottled gas, consist of a body, a firebox with a burner and a heating shield. Models designed for liquefied gas are suitable for small houses, no more than two floors.
They do a poor job of heating large areas. Gas furnaces on natural gas can operate both in continuous and temporary mode.
There may be several reasons for installing gas stoves in the country:
- She quickly warms up the room;
- No need to clean the chimney pipes, unlike a brick oven;
- You can adjust the temperature;
- It is easy to rearrange to another place if necessary;
- Safe to use;
- Does not require electricity.
This version of the heater can be called almost a direct descendant of the famous Russian stoves with tubular chimneys. In addition, the design is trite like wood-burning stoves, which for a long time were the most popular in summer cottages.
This similarity is largely due to the furnace shutter, covered with a door. It conveniently and simply opens the heater.
Thanks to numerous developments, the best option turned out to be the location of the heater a little lower than the burner and the shape of a metal container with sides, somewhat similar to a trough. This is not just a whim of engineers or something else, but one of the most important safety measures when using a gas appliance in this category.
This design is simply necessary to avoid the attenuation of the wick of the flame in case of possible ingress of moisture on the burner or stones.
In addition, everyone is well aware that another trouble is possible when using gas appliances, which can lead to serious consequences and pose a danger to the health and life of your family and neighbors.
The highest explosiveness of gas is widely known to all users. In the light of recent events, the consequences of the leakage and explosion of gas products are well known.
A careful study of regulatory documents, instructions for devices, will allow you to know not only the main points of ensuring your own safety, but numerous points that will allow you to significantly improve it.
The engineering design of gas equipment for summer cottages today is equipped with modern automation, which instantly interrupts the gas supply in situations where the flame has gone out.
This allows summer residents not to waste time constantly monitoring the country stove, but to enjoy gardening and gardening chores in perfect safety.
Gas heaters have a heating temperature of up to 800 degrees, which is why they become indispensable for heating rooms, the area of \u200b\u200bwhich can be up to 60 square meters.
The power of this or that heater model can be adjusted using various thermal modes, which will give you the opportunity to maintain the most optimal temperature in the house.
Gas heaters are powered by cylinders that can be refilled at any gas station.
Gas heaters have fall sensors and gas control systems, so their use is absolutely safe (even without constant monitoring and supervision).
The body of gas heaters is most often made of stainless steel, and therefore they are not afraid of environmental influences, and will also serve you for many years.
Without any doubt, the most suitable option for gasification is a metal furnace. Unlike wood, gas burns very quickly and releases a lot of heat. A brick stove is not capable of processing such a powerful stream.
However, under certain conditions, it is possible to convert a brick oven to gas:
- If the device is made according to the Swedish or Dutch system;
- Combustion must take place in the furnace;
- The stove for a bath and a house should not be massive masonry and an extensive furnace part (a Russian stove will not work).
If the stove meets all these requirements and it still managed to be converted to gas, then it should be borne in mind that the brick structure on gas accelerates for a very long time. Within 4-6 days, the gas supply is increased from a minimum to a maximum. Therefore, it makes sense to gasify only those devices that are used constantly.
Advantages and disadvantages of gas ovens
The undeniable advantages of gas heating can be considered:
- Gas heaters are able to heat up to a temperature of 800 degrees, which ensures their indispensability in the process of heating a suburban building.
- One heating device is able to effectively heat a room whose area is approximately 60 square meters.
- Modern heaters provide the ability to effectively control power through the use of different thermal modes. This makes it possible to maintain the most suitable temperature in the room.
- Devices of this kind can be powered by special cylinders, which are usually refueled at a regular gas station.
- There are special fall sensors, as well as systems of special quality control over gas. Therefore, the use of the device is completely safe, there is no need to waste time on monitoring.
- Modern gas appliances are made of high-quality steel, they are not at all afraid of the influence of environmental factors, moreover, they will serve the owner of the dacha for the longest possible time.
Environmental friendliness.
To date, furnaces and boilers using gas as fuel are the safest from an environmental point of view. Unlike their solid fuel counterparts, they are non-toxic.
High efficiency.
Even in the most severe frosts, gas stoves are able to effectively heat the house.
Profitability.
This criterion is especially pronounced in the area where gasification has already taken place and main gas has been carried out. Nevertheless, for periodic heating of the dacha, a gas stove connected to a conventional cylinder will differ in the same insignificant operating costs.
Ease of use.
Here comments are superfluous. To ensure comfort, it is enough to install the stove and connect it to a gas source.
Reliability and durability of use.
The warranty period for the trouble-free service of a gas furnace is 10-12 years. As practice shows, in reality this period is much longer. By choosing this option for heating a summer house, you can forget about a number of problems for many years.
An extensive list of advantages of gas heating equipment cannot but be diluted a little with the disadvantages inherent in such systems:
- The high cost of heating devices. Having decided to use gas for heating the dacha, you should immediately be prepared for the fact that the purchase and installation of the furnace will cost a considerable amount.
- The complexity of installation and connection. The slightest mistake of the installer can easily turn into considerable problems in the operation of the gas oven. In the best case, the device simply will not perform its tasks, in the worst case, it can become a source of danger to the health and life of people.
Types of gas appliances for space heating
Externally, the gas furnace is no different from the boiler. It has a metal (steel or cast iron) body, a firebox in which the burner is mounted, a smoke exhaust system and automatic adjustment. It is rather difficult to make a single classification of devices, therefore all models are divided in several ways according to a specific feature.
According to the principle of energy release and transfer, furnaces are divided into models with a circuit and without a circuit, open or closed type. An important factor is the frequency and duration of residence in the house.
The heat capacity of the material from which the gas stove is made for giving affects the nature of its use. So, for the rapid heating of a room during a temporary stay, a steel structure is considered more suitable. Its heat capacity is small and ensures the transfer of energy through the walls without time delay.
On the opposite side, a cast-iron model is considered. Cast iron is able to store energy. This leads to efficient heating of the air in the house with the constant operation of the furnace.
The methods of controlling the operating mode of the burner determine the types of furnaces.
A simple single-stage burner is considered the most reliable due to the simplicity of its design. It does not require power consumption, but allows you to turn on or off the gas supply.
The two-stage burner provides switching to an economical mode of operation. There are options with a smooth change in flame power.
According to the method of air supply, furnaces are distinguished with natural circulation and forced circulation, in which special pumps are used. When implementing forced circulation, it is possible to increase the efficiency of the furnace by several units.
Each gas heater for a summer residence has to be initially launched. Depending on the method of ignition and the manipulations performed for this, models with an electrical system and a system based on the piezoelectric effect can be distinguished.
Gas heaters are presented as a separate class, as more compact, and sometimes portable devices. They are distinguished from furnaces by the scale of heating, the principle of operation and the mass of the structure.
Gas convectors
With their appearance, these devices are very reminiscent of water heating radiators familiar to our eyes, and they work in the same way: the heated surface imparts heat to the surrounding air, and it is already spreading throughout the room due to the phenomenon of convection.
The convector is convenient because it allows you to create a comfortable microclimate throughout the room. True, this requires a relatively large amount of energy, because a significant part of the heat goes outside through the building envelope.
Convectors can work both on natural, and "balloon" gas.
Their main advantages:
- High power - up to 6000 W;
- Easy installation and the ability to move the device to any room;
- Efficient heating up to 80 sq. meters;
- The presence of a thermostat that regulates the intensity of gas supply depending on the set temperature level (you can set the temperature regime from +10 to 38 degrees).
Such a heating furnace can be made in two modifications - with a closed and open combustion chamber.
Closed stove models are equipped with an additional chimney that removes combustion products, open stoves are models that look like a fireplace and have an open combustion chamber.
Infrared heater
The basis of the device is an infrared burner.
She received such an epithet for the fact that a ceramic surface heated by a flame emits infrared radiation. The surrounding bodies in the room absorb this radiation, heat up and heat the air.
This method of energy transfer is considered effective for both small and large premises.
Convection gas ovens - these heating devices are designed for summer cottages with an area of \u200b\u200bup to 350 squares and work on a simple principle.
Here, the lower calorific value is used, that is, the heating of the rooms of the house occurs due to the amount of heat that is generated in the process of complete combustion of gas.
Convection appliances have several advantages: Minimal heat loss. A variety of modifications that allow you to choose a model for any dacha, whether it is 40 squares or 250.
Availability of protection functions in case of an emergency. Possibility of automatic temperature control. Convection models also have their drawback - most ovens have a low power of up to 1000 watts.
For heating residential summer cottages, it is advisable to use an infrared heater with a ceramic burner. It has a number of advantages, such as:
- operational reliability;
- efficiency (0.3 l of fuel is burned in 1 hour);
- long service life.
During the operation of these devices, thermal radiation is directed in such a way that it is not the air that is heated, but everything in the room:
- walls;
- items;
- furniture;
- people.
The heat source is a gas burner.
Emission of harmful substances into the premises is impossible due to ceramic plates, which contribute to the complete combustion of fuel. The design is designed in such a way that you can install the device on the wall and ceiling.
It must be borne in mind that the room must be regularly ventilated, because an open flame is used in such a device. Additional fans are installed in the device, which provide turbo heating.
It is possible to choose a heater with a power suitable for the area planned for processing.
Ceramic infrared gas furnaces are classified into several groups according to certain features and characteristics:
- By type of fuel - mainly stoves for summer cottages, designed to run on liquefied gas, connecting to cylinders through a reducer. Devices for constant heating, capable of operating on main gas.
- Type of installation - a ceramic gas-fired stove for heating summer cottages, is available in a floor version. Some modules are installed on legs or mounted on the wall using special fasteners.
According to the principle of heating - stoves are divided into black and light.
The first ones heat the room, but due to the fact that the heated gases pass inside the heat-resistant pipe, they practically do not emit light.
The second - light, in the process of heating, emit a pleasant light, which serves as additional lighting.
When installing the oven, special attention is paid to the correct location. For full heating, it is important that the infrared rays do not encounter obstacles in the form of furniture or interior partitions.
Dimensions - for heating country houses, they produce small-sized gas stoves. The maximum weight of the device is maintained at 7-20 kg.
Additional features - some manufacturers, to increase heat transfer, combine infrared radiation and convection. Air masses constantly pass through the heating element, heating up and giving off heat to the heated room.
catalytic heater
Combustion is a chemical oxidation reaction that releases heat. A flame is a plasma, an ionized gas. It is possible to provoke an oxidation reaction without the formation of a plasma, only for this auxiliary components are needed - catalysts.
The operation of a catalytic heater is based on this theory. The role of the catalyst is played by a heating panel made of fiberglass and platinum. Work efficiency is increased by using forced convection.
A catalytic heater with a gas cylinder does not take up much space, but it is a productive source of heat.
The advantage of such a device is the absence of combustion products, which means that it can be installed in any room, even if there is no ventilation.
This type of gas heaters can be safely called the safest in operation. The fact is that there is no open flame at all - the oxidation of gaseous hydrocarbons occurs on a chemical basis, due to a special fiberglass heating element, in which the thinnest platinum coating is used as a catalyst that provides the desired reaction.
Be that as it may, it is still a process of "combustion", that is, oxidation, with the corresponding generation of thermal energy.
With such combustion of gas, a minimum amount of oxygen is consumed, which has a positive effect on the atmosphere in the room. The model range is quite wide, and you can purchase both a heater for full-fledged heating of a quite decent-sized room, and a compact mobile version.
In principle, devices of the catalytic principle of operation could be considered the best option. The only drawback is only a fairly high price for them - but this is due to the peculiarities of their production technology.
gas gun
Another type of heater is a gun.
A powerful stream of air blowing around the heat generator quickly heats up and enters the room. The gun has a high level of noise, so it is used to heat industrial premises, garages, makeshift houses.
Often, such a device is used during construction work in the winter, if it is necessary to ensure the drying of the building material.
Outwardly, the gun resembles a pipe, at the bottom of which a control unit is installed. A gas burner is located in the pipe and a fan is installed. The control unit provides gas supply and regulation of its supply.
Such devices are cylinders that are mounted on a solid stand. All equipment is hidden behind a layer of metal. There is also a gas intake system and all the necessary controllers.
The gas gun for a summer residence can be presented in various power. This depends on the size of the equipment. The most inexpensive option will qualitatively heat a room up to 30 m². But if necessary, you can also buy a heat gun, which is enough to heat an area up to 500 m².
In a heat gun, gas is converted into thermal energy. Heating occurs by direct and indirect methods. All combustion products are removed through a separate pipe.
In such structures, there is a special system that immediately turns off the gas supply when negative factors are detected, for example, with a strong decrease in the oxygen level in the room.
Of the advantages of such devices, it is worth noting their mobility. A small heat gun can be used in the gazebo or on the terrace. But when heating a room with such units, many complain about the unpleasant smell of combustion products.
Gas stove for giving with a cylinder
It has gained immense popularity among consumers.
Reasons: economical and affordable fuel, such models do not require increased attention during operation, they practically do not create waste, which significantly reduces the frequency of cleaning chimney channels. You can arrange one cleaning for several years.
It is necessary to install such a model carefully, observing safety criteria. It is necessary to replenish the cylinder in a timely manner if your dacha is not gasified.
Operate this oven as recommended. And then it can last up to 50 years. Also, do not forget to repair it in a timely manner and arrange preventive examinations.
Subject to these rules, your cottage will be provided with a reliable source of heat.
When choosing a stove, you need to focus on the living space. For every 10 m², experts recommend using 1 kW. There should be no problems with connecting equipment, since stoves of this type are always equipped with gas cylinders with different volumes.
As for the power of this model, you select them according to your needs. It is better to take versions with a significant power reserve. After all, this stove does not warm the room with sufficient dynamics, and then it can switch to a gentle mode or stop working altogether.
Often, when buying a modification with a cylinder, there is such a mistake: weak units are bought, their power is completely insignificant. It turns out that the operation is above the required parameters.
Users believe that such a technique will heat the room with high quality. In fact, this model will work at the limit of its power and will break down very soon. Therefore, it is better to select modifications with a power that is in the middle interval.
In many models, the gas tank is placed inside, very compact, like an aerosol can. Other devices are connected through a hose to a standard small capacity cylinder.
With such a heater it is quite possible to warm up the air in the tent in the evening, to install it not far from you while fishing, if it is cold to sit. They are often used in home workshops if you want to perform this or that work in the winter.
How to choose the right gas stove for a summer residence
Choosing a gas stove for a summer residence is not an easy task. That is why you should approach it as responsibly as possible.
The calculation of performance is performed taking into account the characteristics of the building. Gas-heated stoves for summer cottages are calculated taking into account the fact that for every 10 m2 of heated area, there is 1 kW of infrared emitter power.
The efficiency of heating, largely depends on properly placed stoves in the house. If it is planned to simultaneously heat several rooms separated by partitions, each room has its own emitter. In this case, it will not work to install one furnace of greater power.
The fact is that infrared heaters do not heat the air, but the surface of objects. Excess temperature is removed by circulating air currents.
Obstacles in the path of infrared rays lead to an instant decrease in heat transfer. Accordingly, in the room where the stove is installed, it will be warm, and in the next room, it will be cold.
Gas prices are getting higher every year. That is why boiler equipment must have a high efficiency of heat generation, which is necessary for heating a country house.
That is why the heat exchanger, which is installed in a gas boiler, must have good thermal insulation.
It is thanks to this component of the boiler design that its efficiency increases.
A good gas stove for a summer residence cannot be very cheap. Very often, domestic equipment is cheaper than foreign ones. This is due to the fact that domestic manufacturers of gas boilers independently reduce their cost due to the fact that they have worse thermal insulation characteristics.
Therefore, it will take you more time to heat your home with such a boiler, and the cost of this will be significantly higher. That is why it is worth choosing a gas boiler from well-known manufacturers who have had a good reputation for a long time.
Also, if you decide to buy gas heaters for summer cottages, other people's reviews will be very useful to you. If a particular model has a negative reputation (even if combined with a low price), then you should refuse to buy it. Otherwise, you may regret your choice in the future.
It is best that the model you choose has positive-neutral reviews that can tell you about the proper quality of the chosen model of gas equipment.
It is worth buying a gas stove that is used both for a country house and for all buildings and territories that are adjacent. For example, you can create the most comfortable atmosphere on the veranda, in the parking area.
In such places, a high-quality modern gas heater may well take care of the proper level of temperature.
Its main advantage is as follows - by means of a gas boiler, the required optimum temperature regime can be effectively maintained in the room itself and in a fairly open area.
When choosing the described heating equipment, professionals advise to pay attention to:
- It is required to pay attention to the presence of the check and the warranty card. In the latter, you should check the name of the purchased device model, as well as the time period for which the warranty is provided.
- It is recommended not to forget that the purchase of a low-quality heater will lead to severe cracking during operation. It is for this reason that before making such a responsible purchase, it is worth making the most thorough check of the equipment.
Packaging.
It must be intact, without dents or holes. It is on the box that such elements as the logo of the manufacturer and the name of a particular model should be present.
Save on social media!